rapiDist-4分析儀

rapiDist-4
Features
- Measuring points from IBP to FBP, free programmable
- Results correlating with ASTM D86
- ASTM D86 conform validation optional
- Cycle time 10 to 15 minutes (for diesel 10 minutes)
- Core components meet ASTM D86 design
  (dosing unit, vaporizer, condenser, receiver)
- Optical level measurement for dosing unit and receiver
  (non-contact and robust)
- Integrated diagnostic and maintenance features
  (includes automatic decoking and remote access)

Marking

ATEX:
II 2G IIC T4 Gb
NEC 500:
Class I, Div. 2, Group B,C, or D, T3 or T4
NEC 505:
Class I, Zone 1,
with Chiller: AEx d e ib mb px IIB+H2 T3 or T4
without Chiller: AEx d e ib px IIB+H2 T4
CEC section 18:
with Chiller: Ex d e ib mb px IIB+H2 T3 or T4
without Chiller: Ex d e ib px IIB+H2 T4

Guidelines/Norms

correlates with: ASTM D86, DIN EN ISO 3405, IP 123

Ambient temperature

+5 °C to +40 °C (+41 °F to +104 °F)

Description

The new BARTEC BENKE rapiDist-4 Analyzer is designed for fast process control of atmospheric distillation columns, blending processes as for all types of middle distillates, feedstock for petrochemical processes (naphtha), jet fuels, fuel oils, diesel fuels, similar petroleum products and liquid hydrocarbons.

Technical data *

Protection class	IP 54
Dimensions	(W x H x D) approx. 1150 x 1900 x 710 mm Space requirements right: 500 mm, left: 500 mm
Storage temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Humidity	5 to 80 % relative humidity at +25 °C, non- corrosive
Weight	approx. 300 kg approx. 450 kg (incl. FKS 1.4-KWS)
Measurement range	+20 °C to +400 °C (+68 °F to +752 °F)
Display	TFT display with touch function, 1024 x 768 pixel
Sample	Quality: filtered 50 μm, no suspended water, bubble-free Consumption: 20 to 40 l/h Pressure at inlet: 1 to 3 bar (14.5 to 43 psi) Temperature at inlet: max. +50 °C (+122 °F) Temperature change: max. 1K/min. Viscosity: max. 37 cSt at inlet temperature
Keyboard	virtual keyboard, controlled via TFT display with touch function
Operating system	Windows 7 Control software: PACS
Voltage	230 VAC ± 10 %, 1 phase; 50 Hz/60 Hz or 110 VAC +/- 10 %, 1 phase; 50 Hz/60 Hz with FKS 1,4-KWS: 400 VAC +/- 10 %; 3 phase; 50 Hz/60 Hz other ratings on request
Power	Maximum power consumption: approx. 700 W (analyzer only) incl. chiller for liquids: approx. 1600 W

*Refer to the documentation for more detailed information

Documentation

Data Sheet - rapiDist-4 Analyzer