Remote I/O Module ANTARES 4AIO

17-6143-1006/0000
Features
- 4 channels analog in/out Ex ia IIC
- 4 channels freely configurable as In or Out
- Inputs active or passive
- 2-, 3-, 4-conductor technology
- Integrated bus rail
- Installation in ATEX Zone 1/2
  or Zone 21/22
- Hot-Swap
- Galvanic isolation between the
- inputs/outputs and the system
- Line break/short-circuit monitoring
- Plug-in and codable spring clamps

Certification

PTB 11 ATEX 2018
IECEx PTB 11.0061
DNV A-13339
TC RU C-DE.BH02.B.00005
KCS KTL 13-KB4BO-0302
KCS KTL 13-KB4BO-0303
UL BR 13.0260

Marking

ATEX:
II 2(1)G Ex ib [ia IIC/IIB Ga] IIC T4 Gb
II (1)D [Ex ia Da] IIIC
IECEx:
Ex ib [ia IIC/IIB Ga] IIC T4 Gb
[Ex ia Da] IIIC

Ambient temperature

-20 °C up to +60 °C

Description

The Remote I/O Module ANTARES 4AIO is operated and supplied with power by means of the Rail Control Unit (RCU) ANTARES. This module allows the direct linking of 4 intrinsically safe 2-, 3-, 4-conductor transmitters or the output of 0 up to 20 mA or 4 up to 20 mA signals.

The hot-swap capability allows the electronic unit to be replaced without disconnecting from voltage even in an Ex atmosphere. The internal and galvanically isolated bus connection is established by simply joining the modules to the RCU. A bus rail is not necessary. Line break/short-circuit monitoring can be programmed for each channel. The bus status messages and individual messages per channel are displayed through the LEDs. This facilitates diagnosis at the module as well. The ANTARES Designer software allows parameters to be set for the signal range, channel type (in or out) and a 4-stage input filter for each channel. See the system description for installation instructions.

Technical data *

Protection class	(EN 60529) Enclosure: IP 30 in the ANTARES system construction
Dimensions	(W x H x D) 45 mm x 110 mm x 114.5 mm
Material	Enclosure material: PA
Installation	Mounting rail TH 35-15 DIN EN 60715 (Metal, galvanized steel)
Storage temperature	-25 °C up to +85 °C
Humidity	5 up to 95 %, non-condensing
Vibration	(EN 60068-2-6) 2 g/7 mm; 5 Hz up to 200 Hz into all 3 axes
Shock resistance	(EN 60068-2-27) 15 g/11 ms, ± 3 shocks per direction
Weight	approx. 390 g
Display	LEDs in enclosure front: Status ST, PWR, ERR1, ERR2 Inputs/Outputs 2 LEDs per channel 1 x LED gelb channel setting 1 x LED rot channel error
Interface	Number of channels 4 inputs or outputs Ex i (short-circuit-proof) Inputs active/passive
Voltage	Minimum voltage at 20 mA: 16 V
Resistance	Input resistance: Ri = 10 Ohm
Signal range	0 to 20 mA or 4 to 20 mA
Connection	- plug-in tension spring clamp 4-pole - up to 2.5 mm² - optional coding and numbering

*Refer to the documentation for more detailed information

Documentation

Data Sheet - Remote I/O Module ANTARES 4AIO

Declaration of Conformity 11-6143-7C0005